10
To position the cam link, extract the cam from its location. Align the hole on the lower part of the cam link
with the hole on the rigging hardware marked with the desired angle (1) and insert the quick release safety
pin (6 mm). The cabinet can now be attached to the bottom of the upper cabinet (2) by hooking the upper
part of the cam link to the positioning point (3) on the upper cabinet, aligning the hole on the upper part of
the cam link with the hole on the lower part of the rigging hardware (4) and inserting the quick release safety
pin (6 mm).
Detail of the left and right markings on the rigging hardware each indicating the obtained splay angles. To
set the cam links, 6 mm quick release safety pins should be used.
AX-aero8
Weight: 6,4 kg.
Dimensions (H x W x D):
174 x 517 x 356 (mm.).
6.85 x 20.35 x 14 (in.).
WLL: 400 kgf.
2 2
1
3
4
0º 0º
1º 1º2º 2º
4º 4º
5º 5º
10º 10º
9º 9º
7º 7º
8º
8º
6º 6º
3º 3º
W
ARNING: WEIGHT
LIMIT 12 UNITS
W
ARNING: WEIGHT
LIMIT 12 UNITS
Manual del Usuario / aero 8A / User’s Manual
To Next Page
Loading...
