Do you have a question about the D.A.S. DS-112A and is the answer not in the manual?
Describes the function of each control, indicator, and connector on the amplifier panel.
Provides instructions for safely switching the sound system on and off sequentially.
Addresses issues where the unit has no sound and the power LED is off.
Troubleshoots no sound when the unit is powered on but the signal LED is off.
Diagnoses issues where the unit does not reach full power or LIMIT LEDs don't light.
Troubleshoots distorted sound, with or without LIMIT LEDs active.
Solves problems with microphone volume and voice clarity.
Addresses feedback problems that occur when the LEVEL is turned up.
Troubleshoots hum or buzz when a mixer is connected to the unit.
Diagnoses hum or buzz originating from lighting controls.