Need help?Do you have a question about the D.A.S. ST-32 and is the answer not in the manual?
General| Configuration | 2-Way |
|---|---|
| Nominal Impedance | 8 Ω |
| Nominal Coverage Angles | 90° H x 60° V |
| LF Driver | 12" Woofer |
| HF Driver | 1" Compression Driver |
| Connectors | Speakon NL4 |
Explains safety symbols like exclamation and double square.
Advises on avoiding rain/moisture and magnetic fields; notes no user serviceability.
Specifies maximum safe height for tripod-mounted speakers.
Details drivers, enclosures, handles, finish, grilles, and connectors for the series.
Explains Neutrik Speakon connectors and speaker wiring options.
Advice on speaker positioning relative to microphones, turntables, and room acoustics.
Guidance on using tripods with portable speaker models for stability and height.
Instructions for using the TRD-4 pole with SUB-18R and ST-18 models.
Illustrates operation angles for stage monitor use.
Explains internal steel angles, flying points, and types of flying hardware.
Describes stereo full-range configurations for various speaker models.
Example of a pub sound system setup with R-112 and SUB-18R.
Example of a medium-sized theatre system with ST-15 and SUB-218.
Step-by-step instructions for powering sound systems on and off correctly.
Guidance on matching amplifier power to speaker power ratings for reliability.
Explanation of amplifier clipping, its effects, and how to avoid it.
How to properly set amplifier level controls for optimal output and prevent clipping.
Explains balanced and unbalanced audio signal transport and connector types.
To Next Page
