16
Using the Configuration Menu (continued)
Home > WAN > PPPoE
IP Address-
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
(Continued on the next page)
User Name-
Your PPPoE username provided by your ISP.
Service Name-
Enter the Service Name provided by your ISP (optional).
Retype Password-
Re-enter the PPPoE password
PPPoE-
Static PPPoE-you have an assigned (static) IP Address.
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE-
receive an IP Address automatically from your ISP.
Primary DNS
Address-
Primary DNS IP address provided by our ISP
Secondary DNS
Address-
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Choose PPPoE (Point
to Point Protocol over
Ethernet) if your ISP
uses a PPPoE con-
nection. Your ISP will
provide you with a
username and pass-
word. This option is
typically used for DSL
services. Select Dy-
namic PPPoE to ob-
tain an IP address
automatically for your
PPPoE connection.
Select Static PPPoE
to use a static IP ad-
dress for your PPPoE
connection.
Please be sure to
remove any exist-
ing PPPoE cli-
ent software
installed on
your com-
puters.
To Next Page
Loading...
