D-Link AirPlus DWL-G730AP - Configuring WPA;WPA-PSK Security

14
Router Mode - Using the Setup WizardRouter Mode - Using the Setup Wizard
Router Mode - Using the Setup WizardRouter Mode - Using the Setup Wizard
Router Mode - Using the Setup Wizard
(continued)(continued)
(continued)(continued)
(continued)
If you selected Dynamic IP
Address, this screen will appear:
(Used mainly for Cable Internet
service.)
The Clone MAC Address button will
automatically copy the MAC address
of the network adapter in your
computer. You can also manually
type in the MAC address.
Select your Internet Connection.
You will be prompted to select the
type of Internet connection for your
router.
If you are unsure of which setting
to select, please contact your
Internet Service Provider.
This setup should be done on
the computer that is registered
on the ISP’s network.
Click Next
Click Next
Set Your Wireless LAN
Connection.
By default the DWL-G730AP
SSID is set to default with a
Channel setting of ‘6’.
Click Next