2
Hardware OverviewHardware Overview
Hardware OverviewHardware Overview
Hardware Overview
Mode Selection Switch:
Used to select AP,
client, or router mode.
LAN Port
This is the connection for Ethernet cables to
your Ethernet-enabled device. When in Router
mode, this port functions as a WAN port.
Receptor for
Power Adapter
Power LED: Solid
indicates a connection
to a good power source.
Top Panel
Bottom Panel
Rear Panel
LAN LED: Solid indicates an
Ethernet connection. Blinking
indicates activity on the
Ethernet network.
WLAN LED: A solid light
indicates that the wireless
segment is ready. This LED
blinks during wireless data
transmission.
Reset Button:
Used to restore
default settings.
To Next Page
Loading...
