D-Link AX1500 - Password Recovery and Reset

141D-Link R15 User Manual
Section 7 - Troubleshooting
• Access the web conguration. Open your web browser and enter the IP address of your D-Link router in the address bar.
This should open the login page for your web conguration.
• If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory
defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the recessed button down until the power LED turns orange. Release the button and the router will go through its
reboot process. Wait about 30 seconds to access the router. The address of the web conguration is printed on the device
label on the bottom of the device. You may also enter the default IP address: 192.168.0.1. When logging in, enter the
default device password printed on the device label too.