D-Link AX1500 - Page 62

57D-Link R15 User Manual
Section 3 - Conguration
2.4GHz - Advanced Settings...
Security Mode
Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/
WPA3-Personal, or WPA3-Personal. WPA3 provides the
highest level of encryption among these. Note that WPS will
be disabled if WPA3 is used.
802.11 Mode (2.4GHz) Select the desired wireless networking standards to use in
your environment.
The available options for the 2.4 GHz wireless network are
Mixed 802.11b/g/n, Mixed 802.11b/g, Mixed 802.11g/n,
802.11b only, 802.11g only, and 802.11n only.
Wi-Fi Channel
Select the desired channel:1-11. The default is Auto
(recommended).
Transmission Power Select the desired wireless transmission power: High, Medium,
or Low.
Channel Width
(2.4GHz)
Select Auto 20/40 MHz if you are using both 802.11n and
non-802.11n (802.11b/g) devices, or select 20 MHz if you are
using a mix of 802.11b/g devices.
HT20/40 Coexistence
(2.4GHz)
Enable or disable the existence of both 20 MHz and 40 MHz
channel width. Keep it enabled to achieve the maximum
operability of wireless products using dierent standards in
your environment. However, it might prevent your 802.11n
devices from reaching the maximum performance.
Visibility Status
The default setting is Visible. Select Invisible if you do not
want to broadcast the SSID of your wireless network.
Schedule Select the time during which the wireless network will be
available. The schedule may be set to Always Enable or you
can add your own schedule.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.