ENGLISH
If you wish to connect your camera to your router with a wireless
connection, you can simply disconnect the Ethernet cable and move the
camera to its intended location.
From any computer, open a web browser, go
to http://www.mydlink.com and log in to your
account.
Click on the device name when the new device
notication appears to add the camera to your
account.
Connect the power cable and Ethernet cable to
your cloud camera.
Connect the other end of the Ethernet cable to your
D-Link Cloud Router and connect the camera’s power
adapter to a power outlet.
Setting up your Camera
Using a D-Link Cloud Router (Zero Conguration)
If you have a D-Link Cloud Router, you can take advantage of Zero Conguration
Setup. This feature automatically congures your camera’s settings for you and
adds it to your mydlink account automatically. If you do not have a D-Link Cloud
router, refer to the next page to install and congure your camera.
DCS-5010L