ENGLISH
Using the Installation Wizard
If you do not have a D-Link Cloud Router, you can simply use any Windows
or Mac computer to go through the Installation Wizard from the CD, which
will guide you through the installation process from connecting your
hardware to conguring your camera.
If you do not have a CD-ROM drive, or the CD is missing,
please download the Setup Wizard from
http://www.mydlink.com/support
After about 20-30 seconds, the Setup Wizard will open, which will guide
you step-by-step through the installation process from connecting your
hardware to conguring your camera and registering it with your mydlink
account.
• Windows Users - Insert the CD. If the Setup Wizard program does not
automatically start on your computer, go to Start > Run. In the run box type
D:\Autorun.exe (where D: represents the drive letter of your CD-ROM drive)
and click OK.
• Mac Users - Insert the CD. On the desktop, open your CD drive, double-click
on the SetupWizard le, and follow the instructions.