EasyManuals Logo

D-Link DES-105 Quick Installation Guide

D-Link DES-105
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Quick Installation Guide
DES-105/DES-108
5 / 8-Port 10/100 Mbps Fast Ethernet Switch
Notice Before Setting Up the DES-105/DES-108
Check Your Package Contents
The setup of the Switch can be performed using the following steps:
A. Install the DES-105/DES-108 in a fairly cool and dry place. See Technical
Specication for the acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust,
and direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for
ventilation.
D. Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
Do not stack any device on top of the Switch.
These are the items included with your DES-105/DES-108 purchase:
Note :
Using a power supply with a different
voltage rating will damage and void the
warranty of this product.
DC Power Adapter
DES-105/DES-108
Quick Installation
Guide

Other manuals for D-Link DES-105

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DES-105 and is the answer not in the manual?

D-Link DES-105 Specifications

General IconGeneral
MAC address table2000 entries
Jumbo frames supportYes
Packet buffer memory0.384 MB
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Networking standardsIEEE 802.1p, IEEE 802.3, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology100BASE-TX, 10BASE-T
Dimensions (WxDxH)100 x 98 x 28 mm
Connectivity technologyWired
Switch typeUnmanaged
Power connectorDC-in jack
Basic switching RJ-45 Ethernet ports quantity5
CertificationRoHS, FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, CB
Product colorBlack
Rack mountingNo
LED indicatorsLink, Power, Y
Housing materialMetal
Input current1 A
Input voltage5 V
Power consumption (typical)3.10 W
Mean time between failures (MTBF)495709 h
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 50 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth98 mm
Width100 mm
Height28 mm
Weight265 g

Related product manuals