DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Source IP
Enter an IP Address mask for the source IP address.
Destination IP
Enter an IP Address mask for the destination IP address.
Dscp (0-63)
This field allows the user to enter a DSCP value in the space provided, which will instruct the
Switch to examine the DiffServ Code part of each packet header and use this as the, or part of
the criterion for forwarding. The user may choose a value between 0 and 63.
Port
The CPU Access Rule may be configured on a per-port basis by entering the port number of the
Switch.
Time Range
Click the check box and enter the name of the Time Range settings that has been previously
configured in the Time Range window. This will set specific times when this CPU access rule will
be implemented on the Switch.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following window:
Figure 9- 26. CPU Interface Filtering Entry Display window - IP
The following window is the CPU Interface Filtering Rule Table for Packet Content.
Figure 9- 27. CPU Interface Filtering Rule Table window – Packet Content
To remove a previously created rule, select it and click the
button. To add a new CPU Access Rule, click the Add button:
131
To Next Page
Loading...
