D-Link DES-3526 - Page 100

DES-3526 Layer 2 Fast Ethernet Switch
1 default 00-00-39-34-66-9A 10 Dynamic
1 default 00-00-51-43-70-00 10 Dynamic
1 default 00-00-5E-00-01-01 10 Dynamic
1 default 00-00-74-60-72-2D 10 Dynamic
1 default 00-00-81-05-00-80 10 Dynamic
1 default 00-00-81-05-02-00 10 Dynamic
1 default 00-00-81-48-70-01 10 Dynamic
1 default 00-00-E2-4F-57-03 10 Dynamic
1 default 00-00-E2-61-53-18 10 Dynamic
1 default 00-00-E2-6B-BC-F6 10 Dynamic
1 default 00-00-E2-7F-6B-53 10 Dynamic
1 default 00-00-E2-82-7D-90 10 Dynamic
1 default 00-00-F8-7C-1C-29 10 Dynamic
1 default 00-01-02-03-04-00 CPU Self
1 default 00-01-02-03-04-05 10 Dynamic
1 default 00-01-30-10-2C-C7 10 Dynamic
1 default 00-01-30-FA-5F-00 10 Dynamic
1 default 00-02-3F-63-DD-68 10 Dynamic
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config multicast port_filtering_mode
Purpose Used to configure the multicast packet filtering mode on a port per
port basis.
Syntax
config multicast port_filtering_mode [<portlist> | all]
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups]
Description This command will configure the multicast packet filtering mode for
specified ports on the Switch.
Parameters <portlist> - Specifies a port or range of ports to view.
[forward_all_groups | forward_unregistered_groups |
filter_unregistered_groups] – The user may set the filtering mode to
any of these three options
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the multicast filtering mode to forward all groups on ports 1 through 4.
DES-3526:4#config multicast port_filtering_mode 1-4
forward_all_groups
Command: config multicast port_filtering_mode 1-4
forward_all_groups
Success.
DES-3526:4#
92