DES-3526 Layer 2 Fast Ethernet Switch
config mirror port
both − Mirrors all the packets received or sent by the port or ports in
the port list.
Restrictions The Target port cannot be listed as a source port. Only
administrator-level users can issue this command.
Example usage:
To add the mirroring ports:
DES-3526:4# config mirror port 1 add source ports 2-7 both
Command: config mirror port 1 add source ports 2-7 both
Success.
DES-3526:4#
Example usage:
To delete the mirroring ports:
DES-3526:4#config mirror port 1 delete source port 2-4
Command: config mirror 1 delete source 2-4
Success.
DES-3526:4#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description This command, combined with the disable mirror command below,
allows you to enter a port mirroring configuration into the Switch, and
then turn the port mirroring on and off without having to modify the
port mirroring configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DES-3526:4#enable mirror
Command: enable mirror
105
To Next Page
Loading...
