D-Link DES-3526 - Page 180

DES-3526 Layer 2 Fast Ethernet Switch
delete iproute default
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the default IP route 10.53.13.254:
DES-3526:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DES-3526:4#
show iproute
Used to display the Switch’s current IP routing table.
show iproute
Description This command will display the Switch’s current IP routing table.
Parameters None.
Purpose
Syntax
Restrictions None.
Example Usage:
To display the contents of the IP routing table:
DES-3526:4#show iproute
Command: show iproute
Routing Table
0.0.0.0 10.1.1.254 System 1 Default
Total Entries: 2
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
10.0.0.0/8 10.48.74.122 System 1 Local
DES-3526:4#
172