DES-3526 Layer 2 Fast Ethernet Switch
config authen application
Purpose Used to configure various applications on the Switch for
authentication using a previously configured method list.
Syntax
config authen application [console | telnet | ssh | http | all]
[login | enable] [default | method_list_name <string 15>]
Description This command is used to configure Switch configuration applications
(console, telnet, ssh, web) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
Parameters application – Choose the application to configure. The user may
choose one of the following five options to configure.
enable - Use this parameter to configure an application for
upgrading a normal user level to administrator privileges, using a
previously configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> - Use this parameter to configure an
application for user authentication using a prevoisly configured
method list. Enter a alphanumeric string of up to 15 characters to
define a previously configured method list.
Restrictions Only administrator-level users can issue this command.
console – Choose this parameter to configure the
command line interface login method.
telnet – Choose this parameter to configure the telnet login
method.
ssh – Choose this parameter to configure the Secure Shell
login method.
http – Choose this parameter to configure the web interface
login method.
all – Choose this parameter to configure all applications
(console, telnet, ssh, web) login method.
login – Use this parameter to configure an application for normal
login on the user level, using a previously configured method list.
Example usage:
To configure the default method list for the web interface:
DES-3526:4#config authen application http login default
Command: config authen application http login default
Success.
191
To Next Page
Loading...
