DES-3526 Layer 2 Fast Ethernet Switch
enable shh
Parameters None.
Only administrator-level users can issue this command. Restrictions
Usage Example:
To enable SSH:
DES-3526:4#enable ssh
Command: enable ssh
Success.
DES-3526:4#
disable ssh
Used to disable SSH.
disable ssh
This command allows you to disable SSH on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Purpose
Syntax
Description
Usage Example:
To disable SSH:
DES-3526:4# disable ssh
Command: disable ssh
Success.
DES-3526:4#
config ssh authmode
Purpose Used to configure the SSH authentication mode setting.
Syntax
config ssh authmode [password | publickey | hostbased]
[enable | disable]
Description This command will allow you to configure the SSH authentication
mode for users attempting to access the Switch.
205
To Next Page
Loading...
