DES-3526 Layer 2 Fast Ethernet Switch
config access_profile profile_id
config account
config admin local_enable
config arp_aging time
config arpentry
config authen application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config command_history
Purpose Used to configure the command history.
Syntax
config command_history <value 1-40>
This command is used to configure the command history.
Parameters
<value 1-40> − The number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed
commands may be viewed.
Restrictions
Description
None.
Example usage
To configure the command history:
DES-3526:4#config command_history 20
Command: config command_history 20
Success.
DES-3526:4#
show command_history
Purpose Used to display the command history.
Syntax
show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
234
To Next Page
Loading...
