D-Link DES-3526 - Web-Based User Interface

DES-3526 Layer 2 Fast Ethernet Switch
Example usage:
To configure the port security:
DES-3526:4#config port_security ports 1-5 admin_state enable
max_learning_addr 5 lock_address_mode DeleteOnReset
Command: config port_security ports 1-5 admin_state enable
max_learning_addr 5 lock_address_mode DeleteOnReset
Success.
DES-3526:4#
delete port_security_entry
Purpose
Used to delete a port security entry by MAC address, port number
and VLAN ID.
Syntax delete port_security_entry vlan name <vlan_name 32>
mac_address <macaddr> port <port>
Description
This command is used to delete a single, previously learned port
security entry by port, VLAN name, and MAC address.
Parameters
vlan name <vlan_name 32> - Enter the corresponding vlan name of
the port which the user wishes to delete.
mac_address <macaddr> - Enter the corresponding MAC address,
previously learned by the port, which the user wishes to delete.
port <port> - Enter the port number which has learned the
previously enterd MAC address.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To delete a port security entry:
DES-3526:4#delete port_security_entry vlan_name default
mac_address 00-01-30-10-2C-C7 port 6
Command: delete port_security_entry vlan_name default
mac_address 00-01-30-10-2C-C7 port 6
Success.
DES-3526:4#
clear port_security_entry
Purpose
Used to clear MAC address entries learned from a specified port for
the port security function.
28