DES-3526 Layer 2 Fast Ethernet Switch
disable snmp traps
Restrictions Only administrator-level users can issue this command.
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DES-3526:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3526:4#
disable snmp authenticate_traps
Purpose Used to disable SNMP authentication trap support.
Syntax
disable snmp authenticate_traps
Description This command is used to disable SNMP authentication support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable the SNMP authentication trap support:
DES-3526:4#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
DES-3526:4#
config snmp system_contact
Purpose Used to enter the name of a contact person who is responsible for
the Switch.
Syntax
config snmp system_contact{<sw_contact>}
Description
The config snmp system_contact command is used to enter the
name and/or other information to identify a contact person who is
responsible for the Switch. A maximum of 255 character can be
used.
50
To Next Page
Loading...
