DES-3526 Layer 2 Fast Ethernet Switch
config snmp system_name
Description
The config snmp system_name command configures the name of
the Switch.
Parameters <sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the Switch name for “
DES-3526 Switch
”:
DES-3526:4#config snmp system_name DES-3526 Switch
Command: config snmp system_name DES-3526 Switch
Success.
DES-3526:4#
enable rmon
Purpose Used to enable RMON on the Switch.
Syntax
enable rmon
Description
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring (RMON)
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable RMON:
DES-3526:4#enable rmon
Command: enable rmon
Success.
DES-3526:4#
disable rmon
Purpose Used to disable RMON on the Switch.
52
To Next Page
Loading...
