Need help?Do you have a question about the D-Link DHP-P621AV and is the answer not in the manual?
General| Type | Powerline adapter |
|---|---|
| Model | DHP-P621AV |
| Interface | Ethernet |
| Powerline Standard | HomePlug AV |
| Security | 128-bit AES encryption |
| LED Indicators | Power, Powerline, Ethernet |
| Power Saving | Yes |
| Standards | HomePlug AV |
| Powerline Frequency Band | 2-28 MHz |
| Plug Type | Type A |
Indicates power status: solid for receiving power, blinking for powering up/saving mode, off for no power.
Shows network connection status and link rate (green, amber, red) or no connection.
Indicates if the Ethernet port is linked (solid) or has no connection (off).
Hold for 10 seconds to reset the device to factory default settings.
Press and hold for two seconds to secure your network.
Connect Ethernet devices like routers, computers, or game consoles.
Secures network by pressing for 2s or resets to factory defaults by pressing for 10s.
To Next Page