D-Link DIR-100 - Logging In to the Web Manager

16
Appendix
Appendix
To connect to the network, make sure
the network adapter in your computer
is configured properly. Here’s how to
congure the network adapter to obtain
an IP address automatically when using
the DIR-100 Router.
For Microsoft Windows
®
XP:
Right click on My Network Places
and select Properties. Right click
on the Network Connection
associated with the Ethernet adapter
and select Properties (i.e., D-Link
DFE-530TX+).
Click OK
Click OK
Select Obtain an IP Address
automatically.
Click Internet Protocol (TCP/IP)
and then click Properties.