Need help?Do you have a question about the D-Link Ethernet Broadband Router DIR-100 and is the answer not in the manual?
General| Category | Wireless Router |
|---|---|
| Model | DIR-100 |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| WAN Ports Qty | 1 |
| LAN Ports Qty | 4 |
| Standards | IEEE 802.3, IEEE 802.3u |
| Ports | 4 x 10/100Base-TX LAN, 1 x 10/100Base-TX WAN |
| Security | NAT |
| Power | 5 V DC |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -20 °C to 70 °C |
| Humidity | 10 - 90% non-condensing |
Navigating the setup wizard and understanding its welcome screen.
Setting password, time zone, and selecting connection type.
Explanation of User Name, Password, and Service Name fields for PPPoE.
Detailed explanation of PPPoE connection parameters.
Details for Host Name, MAC Address, and cloning MAC.
Explanation of IP Address, Subnet Mask, DNS, and MTU for Dynamic IP.
Interface for configuring static IP address settings.
Configuration for PPPoE Russia Dual Access connections.
Interface for configuring PPTP client connections.
Details on IP Address, Subnet Mask, PPTP Account, and MTU.
Configuration for PPTP Russia Dual Access connections.
Interface for configuring L2TP client connections.
Details on IP Address, Subnet Mask, L2TP Account, and MTU.
Specific settings for BigPond Australia ISP connections.
Configuring rules for remote access to LAN services.
Steps to configure Windows XP for automatic IP settings.
Steps to configure Windows 2000 for DHCP.
Steps to configure Windows 95/98 for DHCP.
To Next Page