D-Link Ethernet Broadband Router DIR-100 User Manual

DIR-100 Ethernet Broadband Router
Setup Wizard – Configure Static IP Address Connection
For Static IP Address connection types, you must type in the IP Address, Subnet Mask, Gateway Address,
Primary DNS Address and Secondary DNS Address (optional). Your ISP should provide this information
to you. Click Next to continue.
Static IP Connection Setting Description
WAN IP Address
The public or global IP address provided by your ISP.
WAN Subnet Mask
The Subnet Mask used for the Internet. This should also be
provided by your ISP
WAN Gateway Address
The IP address of the gateway router owned by your ISP. Your
ISP should provide this IP address.
Primary DNS Address
The primary DNS (Domain Name Server) IP address provided
by your ISP
Secondary DNS Address
This is an optional DNS Address entry to be used if the primary
DNS Fails.
15

D-Link Ethernet Broadband Router DIR-100 Specifications

General

Category	Wireless Router
Model	DIR-100
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
WAN Ports Qty	1
LAN Ports Qty	4
Standards	IEEE 802.3, IEEE 802.3u
Ports	4 x 10/100Base-TX LAN, 1 x 10/100Base-TX WAN
Security	NAT
Power	5 V DC
Operating Temperature	0 - 40 °C
Storage Temperature	-20 °C to 70 °C
Humidity	10 - 90% non-condensing