D-Link Ethernet Broadband Router DIR-100 User Manual

DIR-100 Ethernet Broadband Router
Maintenance
The menus of the Maintenance directory include Device Administration, Save and Restore, Firmware
Update, DDNS Setting, System Clock, Scheduules and Log Setting.
Maintenance menu directory – Aministrator Settings menu
Device Administration
The Device Administrator menu is used to change the administrator’s login name and password as well as
remote management set up. To change the login name or password, enter the new Login Name and
password into the New Password field and repeat the password in the Confirm Password field. Click Save
Settings to set your new password.
This window will also allow the user to enable remote management of the device from a remote computer.
To configure this function, click Enable Remote Management under the Remote Management heading
and type IP address of the system used for remote management. Click Save Settings to set these
configurations into the memeory of the Router.
46

D-Link Ethernet Broadband Router DIR-100 Specifications

General

Category	Wireless Router
Model	DIR-100
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
WAN Ports Qty	1
LAN Ports Qty	4
Standards	IEEE 802.3, IEEE 802.3u
Ports	4 x 10/100Base-TX LAN, 1 x 10/100Base-TX WAN
Security	NAT
Power	5 V DC
Operating Temperature	0 - 40 °C
Storage Temperature	-20 °C to 70 °C
Humidity	10 - 90% non-condensing