EasyManuals Logo

D-Link Ethernet Broadband Router DIR-100 User Manual

D-Link Ethernet Broadband Router DIR-100
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
DIR-100 Ethernet Broadband Router
Installation Information
Print this page and record the listed information here in case you have to re-configure your WAN
connection in the future or reset the device configuration settings.
Information you will need from your Internet service provider:
Username (PPPoE connections)
This is the Username that is used to log on to
your Internet service provider’s network. It is
commonly in the form user@isp.com.
Record your
info here.
Password (PPPoE connections)
This is the Password that is used, in
conjunction with the Username above, to log
on to your Internet provider’s network.
Internet Connection Type
This is the method that your ISP uses to send
and receive data between the Internet and your
computer.
Information you will need about your DIR-100 Ethernet Broadband Router:
Username
This is the Username you will be prompted to
enter when you access the DIR-100
configuration screens using a Web browser.
The default Username is admin.
Record your
info here.
Password
This is the Password you will be prompted to
enter when you access the DIR-100’s
configuration windows using a Web browser.
There is no initial Password.
LAN IP address of the DIR-100
This is the IP address you will enter into the
Address field of your Web browser to access
the DIR-100’s configuration windows using a
Web Browser. The default IP address is
192.168.0.1.
LAN Subnet Mask of the DIR-100
This is the subnet mask used by the DIR-100,
and will be used throughout your LAN. The
default subnet mask is 255.255.255.0.
Information you will need about your LAN or computer:
DHCP Client status
Your DIR-100 Broadband Router is configured,
by default, to be a DHCP server. This means
that it can assign an IP address, subnet mask,
and a default gateway address to computers
on your LAN. The range of IP addresses the
DIR-100 will assign are from 192.168.0.100 to
192.168.0.199. Your computer (or computers)
needs to be configured to Obtain an IP address
automatically (that is, they need to be
configured as DHCP clients.)
Record your
info here.
v

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Ethernet Broadband Router DIR-100 and is the answer not in the manual?

D-Link Ethernet Broadband Router DIR-100 Specifications

General IconGeneral
CategoryWireless Router
ModelDIR-100
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet
WAN Ports Qty1
LAN Ports Qty4
StandardsIEEE 802.3, IEEE 802.3u
Ports4 x 10/100Base-TX LAN, 1 x 10/100Base-TX WAN
SecurityNAT
Power5 V DC
Operating Temperature0 - 40 °C
Storage Temperature-20 °C to 70 °C
Humidity10 - 90% non-condensing

Related product manuals