D-Link Ethernet Broadband Router DIR-100 User Manual

DIR-100 Ethernet Broadband Router
Setup Wizard – Configure Dynamic IP Address Connection
For Dynamic IP Address connections, you may want to copy the MAC address of your Ethernet adapter to
the Router. Some ISPs use the unique MAC address of your computer’s Ethernet adapter for identification
and for IP address assignment (DHCP) when you first access their network. This can prevent the Router
(which has a different MAC address) from being allowed access to the ISP’s network (and the Internet). To
clone the MAC address of your computer’s Ethernet adapter, click the Clone MAC Address button. Click
Next to continue.
DHCP Connection Setting Description
Host Name
The Host Name is optional but may be required by some ISPs.
MAC
If you clone the MAC address of your computer to the Router,
the MAC address will appear here. This will be the MAC address
recorded by the ISP’s server when the connection is initiated.
Clone MAC Address
The default MAC address is set to the Internet’s physical
interface MAC address on the Broadband Router. You can use
the “Clone Your PC’s MAC Address” button to copy the MAC
address your computer’s Ethernet Card to the Router.
14

D-Link Ethernet Broadband Router DIR-100 Specifications

General

Category	Wireless Router
Model	DIR-100
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
WAN Ports Qty	1
LAN Ports Qty	4
Standards	IEEE 802.3, IEEE 802.3u
Ports	4 x 10/100Base-TX LAN, 1 x 10/100Base-TX WAN
Security	NAT
Power	5 V DC
Operating Temperature	0 - 40 °C
Storage Temperature	-20 °C to 70 °C
Humidity	10 - 90% non-condensing