3
DIR-506L
ENGLISH
Plug In a USB Flash Drive and Turn On the
DIR-506L
Insert your USB drive into the USB port on the DIR-506L. Slide the
power switch to the ON position and wait until the power, USB, and
wireless LEDs turn green. Please allow 3-4 minutes for the boot-up
process to complete.
LAN
ON
OFF
5V
Connect to the DIR-506L Wirelessly
Use the following information to connect to your DIR-506L wirelessly:
• Default WiFi SSID: dlink_DIR-506L
• Default Password: (leave this blank)
To Next Page
Loading...
