DIR-620 Quick Installation Guide
Wired WAN Connection
1. Go to the Net / WAN page and delete the default connections
(WAN/WAN_v6). To do this, select the checkbox located to the left of
the relevant line in the table and click the Delete button.
2. Click the Add button.
3. In the General settings section, in the Provider drop-down list, leave
the Manually value.
4. From the Connection Type drop-down list, select the needed value.
5. From the Interface drop-down list, select the Internet value.
6. Specify a name for your connection (any name for easier identification) in
the Name field.
22
To Next Page
Loading...
