DIR-632 Quick Installation Guide
8. If your ISP uses authorization via the 802.1x protocol, in the
Authorization via 802.1x protocol section, select the Authorization
in the ISP's network via 802.1x protocol checkbox. Fill in the fields
of the section in accordance with data provided by your ISP. The section
is not displayed for the connection of PPPoE type.
9. For connection of PPPoE type: in the PPP section, enter authorization
data provided by your ISP (the username (login) in the Username field
and the password in the Password and Password confirmation
fields), or select the Without authorization checkbox if authorization
is not required.
25
To Next Page
Loading...
