DIR-632 Quick Installation Guide
Configuring User Tunnel
Create your WAN connection in accordance with data provided by your ISP.
Then create a connection of the PPTP or L2TP type.
1. Go to the Net / WAN page and click the Add button.
2. In the General settings section, in the Provider drop-down list, leave
the Manually value.
3. From the Connection Type drop-down list, select the needed value.
4. Make sure that the auto value is selected from the Port drop-down list.
5. Specify a name for your connection (any name for easier identification) in
the Name field.
29
To Next Page
Loading...
