Configuring Your Router
• Unbox the router and power up the router.
• Connect the Act internet cable to the WAN/Internet port(different coloured port) of the router.
• An extra cable will be available with the router, take LAN cable connect one end to the LAN port(1-
4) of the router(any one port) and one end to the PC or Laptop.
• In the system press key & R key together to open Run dialog box.
• Type ipconfig on the command prompt(Black screen) . The default gateway of the LAN or Ethernet
adapter will be the Router address. (Ex:192.168.1.1)
STEP 1 (a): Connect Your PC to the Router
To Next Page
Loading...
