DIR-830M Quick Installation Guide
2. If a particular MAC address was registered by your ISP upon concluding
the agreement, from the MAC address assignment method drop-
down list (available for the Router mode only), select the Manual value
and enter this address in the MAC address field. Choose the Clone
MAC address of your device value to place the MAC address of your
network interface card in the field, or leave the Default MAC address
value to place the router’s WAN interface MAC address in the field.
3. If the Internet access is provided via a VLAN channel, select the Use
VLAN checkbox and fill in the VLAN ID field (available for the Router
mode only).
4. Click the NEXT button.
35
To Next Page
Loading...
