D-Link DIR-842 - Page 37

DIR-842 Quick Installation Guide
Wireless Module Parameters
Advanced functions
· Support of client mode
· WMM (Wi-Fi QoS)
· Information on connected Wi-Fi clients
· Advanced settings
· Smart adjustment of Wi-Fi clients
· Guest Wi-Fi / support of MBSSID
· Rate limitation for wireless network/separate MAC
addresses
· Periodic scan of channels, automatic switch to least
loaded channel
· Support of 802.11ac (5GHz) and 802.11n (2.4GHz)
TX Beamforming
· Autonegotiation of channel bandwidth in accordance
with environment conditions (20/40 Coexistence)
· Support of STBC
Wireless connection rate
· IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
· IEEE 802.11b: 1, 2, 5.5, and 11Mbps
· IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
· IEEE 802.11n (2.4GHz): from 6.5 to 300Mbps (MCS0–
MCS15)
· IEEE 802.11n (5GHz): from 6.5 to 300Mbps (from MCS0
to MCS15)
· IEEE 802.11ac (5GHz): from 6.5 to 867Mbps
(from MCS0 to MSC9)
Transmitter output power
The maximum value of the
transmitter output power
depends upon the radio
frequency regulations applied in
your country
· 802.11a (typical at room temperature 25 °C)
14dBm at 6, 9, 12, 18, 24Mbps
13dBm at 36Mbps
12.5dBm at 48Mbps
12dBm at 54Mbps
· 802.11b (typical at room temperature 25 °C)
15dBm at 1, 2, 5.5, 11Mbps
· 802.11g (typical at room temperature 25 °C)
15dBm at 6, 9, 12, 18, 24, 36, 48, 54Mbps
· 802.11n (typical at room temperature 25 °C)
2.4GHz, HT20
15dBm at MCS0~7
2.4GHz, HT40
15dBm at MCS0~7
5GHz, HT20
14dBm at MCS0~4
13dBm at MCS5
12.5dBm at MCS6
12dBm at MCS7
5GHz, HT40
14dBm at MCS0~2
13dBm at MCS3~4
37