Do you have a question about the D-Link DIR-842V2 and is the answer not in the manual?
Product type | Tabletop router |
---|---|
Product color | Black |
LED indicators | Power, WAN |
Indication light | Yes |
Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
WLAN data transfer rate (max) | 1200 Mbit/s |
WLAN data transfer rate (first band) | 300 Mbit/s |
WLAN data transfer rate (second band) | 867 Mbit/s |
DSL WAN | No |
WAN connection type | RJ-45 |
Ethernet LAN (RJ-45) ports | 5 |
Antennas quantity | 4 |
Antenna gain level (max) | 5 dBi |
Cabling technology | 10/100/1000Base-T(X) |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3u |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Ethernet LAN interface type | Gigabit Ethernet |
Browser supported | Microsoft Internet Explorer 10+, Microsoft Edge 20.10240+, Firefox 44, Chrome 48+, Safari 8, Opera 35 |
Security algorithms | 128-bit AES, WPA3, WPS |
Number of products included | 1 pc(s) |
Output current | 1 A |
Output voltage | 12 V |
AC input voltage | 100 - 240 V |
Power source type | AC |
AC input frequency | 50 - 60 Hz |
Storage temperature (T-T) | -20 - 65 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 10 - 90 % |
Certification | FCC, CE |
Harmonized System (HS) code | 85176990 |
Depth | 132.5 mm |
---|---|
Width | 181 mm |
Height | 47.71 mm |
Weight | 304.8 g |
Install antennas, position router near modem and computer, and connect to power source.
Connect modem to router's Internet port using an Ethernet cable.
Wait for 2.4 GHz and 5 GHz wireless LEDs to turn on for setup.
Connect computer to the router's Wi-Fi network using provided credentials.
Type http://dlinkrouter.local./ into a web browser to complete setup.
Troubleshoot access to the web-based configuration utility by verifying the URL and network connection.
Resolve no Internet access by rebooting the router or contacting the service provider.
Reset the router to factory defaults if device or wireless network password is forgotten.
Restore router to factory settings by holding the reset button for 10 seconds.