39D-Link DIR-855 User Manual
Section 3 - Configuration
Network Filters
Select Turn MAC Filtering Off, Allow MAC
addresses listed below, or Deny MAC
addresses listed below from the drop-down
menu.
Enter the MAC address you would like to
filter.
To find the MAC address on a computer,
please refer to the Networking Basics section
in this manual.
Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Click to remove the MAC address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Clear:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the network. You can either manually add a MAC address or select the MAC address from the list of
clients that are currently connected to the Broadband Router.
To Next Page
Loading...
