D-Link DIR-860L Quick Install Guide

Installation
Quick Install Guide
Package Contents
DIR-860L Extreme Range Wireless
Dual Band Gigabit Router
1
2
If you have an existing router, turn it o and remove all
connected cables.
3
Disconnect all Ethernet cables from your
computer and modem.
4
Using an Ethernet cable, connect your modem to the
yellow port labeled Internet on the back of your router.
Power LED - A solid green light indicates a
proper connection to the power supply. The
light will blink green during the WPS process.
The light will blink orange during boot up.
Internet LED - A solid light indicates
connection on the Internet port. If the LED
is orange, the connection is good but the
router cannot connect to the Internet. If
the light is green, the router is properly
connected to the Internet.
DIR-860L
LEDs (from top to bottom)
Turn o or unplug your cable or DSL
broadband modem.
Extreme Range Wireless
Dual Band Gigabit Router
Existing Router
Modem
Computer
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
5
Plug in and turn on your modem.
INTERNET
6
Connect the power adapter to your router and plug it into an
outlet. Wait for the Power light to turn green (may take up to
45 seconds). Ensure the Power button is in the ON position.
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
For a wired connection: Using an Ethernet cable,
connect your computer to the port labeled 1 on
the back of your router.
Open a web browser (e.g., Internet Explorer,
Chrome, Firefox, or Safari) and enter http://
dlinkrouter.local. /. You can also enter the IP
address of the router (http://192.168.0.1).
The router will try to automatically detect your internet connection.
If it is unable to do so, you will have to select your internet connection
type from this list. If you use DSL for internet (through the phone
line), select Username/Password Connection (PPPoE). If you use
cable for internet, select DHCP Connection (Dynamic IP Address).
For other internet connections, contact your ISP for details. Click
Next to continue.
When the Welcome screen appears,
click Next to start the setup wizard.
If you chose PPPoE, enter the User Name and Password
provided to you by your ISP to connect to the internet.
Click Next to continue.
7
8
109
12V
2A
USB
WPS
1
2
LAN
3
4
INTERNET
POWER
INTERNET
INTERNET
Modem
Ethernet Cable
Wi-Fi Conguration Card
Power Adapter
Note:
Please go to support.dlink.ca/DIR-860L to
download the latest rmware and user manual.
Important: For the quick setup wizard to work properly, you must have a working Internet connection.
For a wireless connection: On your computer, tablet, or
smartphone, nd the wireless network that is shown on
your router information card (ex: dlink-a8fa). Then, enter
the Wi-Fi password on your card (ex: akbdj19368).
http://192.168.0.1
5V
-- -
3A
12 LAN3 4I NTERNET
RESET
D-Link Router
Information Card
SSID:
Password:
Router
Computer
Modem
RouterComputerModem
Router
Computer
Modem
Router
Computer
Modem
Router
Computer
Laptop
Modem

D-Link DIR-860L Specifications

Device Interfaces

wireless LAN	802.11 a/b/g/n/draft ac
LAN ports	Four 10/100/1000 Gigabit
WAN port	10/100/1000 Gigabit
USB port	USB 3.0

Power

input voltage	100 to 240 V AC
input frequency	50/60 Hz
output voltage	12 V DC
output current	2 A
USB port power voltage	5 V
USB port power current	0.9 A

Operating Environment

operating temperature	0 °C to 40 °C (32 °F to 104 °F)
humidity	95% maximum (non-condensing)

Weight and Dimensions

length	10.23 cm (4.03 inches)
width	12.33 cm (4.85 inches)
height	21.7 cm (8.54 inches)