Need help?Do you have a question about the D-Link DIR-860L and is the answer not in the manual?
Device Interfaces| wireless LAN | 802.11 a/b/g/n/draft ac |
|---|---|
| LAN ports | Four 10/100/1000 Gigabit |
| WAN port | 10/100/1000 Gigabit |
| USB port | USB 3.0 |
Power| input voltage | 100 to 240 V AC |
|---|---|
| input frequency | 50/60 Hz |
| output voltage | 12 V DC |
| output current | 2 A |
| USB port power voltage | 5 V |
| USB port power current | 0.9 A |
Operating Environment| operating temperature | 0 °C to 40 °C (32 °F to 104 °F) |
|---|---|
| humidity | 95% maximum (non-condensing) |
Weight and Dimensions| length | 10.23 cm (4.03 inches) |
|---|---|
| width | 12.33 cm (4.85 inches) |
| height | 21.7 cm (8.54 inches) |
Details changes and updates made to the manual.
Lists registered trademarks of D-Link and other companies.
Lists all items included in the router package.
Outlines the necessary hardware and software for the router.
Describes the physical components and ports of the router.
Prepares users for installation by listing necessary information and checks.
Step-by-step guide to connecting the router to the modem.
Instructions for using the DIR-860L as an access point or switch.
Guides users through initial router setup and internet connection.
Covers manual configuration of various internet connection types.
Configures wireless network name (SSID) and security settings.
Manages the router's local IP address and DHCP server settings.
Covers IPv6 connection types and configuration options.
Step-by-step guide to configure wireless network settings.
Allows manual configuration of 2.4GHz and 5GHz wireless bands.
Guides configuration of WPA/WPA2 security using a pre-shared key.
Configures router's IP address, subnet mask, and hostname.
Manages IP address assignment for network devices.
Displays and manages reserved IP addresses for devices.
Detailed steps for remote access to USB drive content.
Allows media sharing via DLNA for compatible devices.
Wizard for setting up IPv6 internet connectivity.
Manual configuration for various IPv6 connection types.
Guides users through registering or modifying their mydlink account.
Specifies the internal IP address for port forwarding.
Defines the ports to be opened for external access.
Assigns a name to the port forwarding rule.
Defines the protocol and port range for port forwarding.
Names the application rule for traffic management.
Specifies trigger ports for applications requiring specific inbound traffic.
Enables Quality of Service for prioritizing network traffic.
Controls network access based on MAC addresses.
Enables parental controls and web access restrictions.
Allows blocking or allowing access to specific websites.
Specifies whether to Allow or Deny traffic based on the rule.
Enables Stateful Packet Inspection for enhanced security.
Exposes a computer to the internet for specific applications.
Specifies the destination IP address for the route.
Sets the next hop gateway for the route.
Improves video and voice quality for wireless clients.
Enables the Wi-Fi Protected Setup feature on the router.
Step-by-step guide to connect wireless devices using the WPS button.
Enables Universal Plug and Play for device compatibility.
Creates and enables isolated wireless networks for guests.
Enables basic security rules for IPv6 traffic.
Specifies destination for IPv6 routing.
Manages administrator password, hostname, and remote management settings.
Sets and synchronizes the router's date and time.
Configures logging of router events to an external SysLog server.
Configures email notifications for router events.
Saves current router configuration to a file.
Resets the router to its original factory default settings.
Updates the router's firmware to the latest version.
Enables dynamic DNS service to access the router via a domain name.
Tests internet connectivity by pinging an IP address.
Assigns a name to a schedule rule.
Displays general information about the router's hardware and software.
Shows WAN MAC address and public IP settings.
Saves router logs to a local hard drive.
Displays packet counts for WAN, LAN, and wireless interfaces.
Shows details of active internet sessions on the router.
Lists currently connected wireless clients and their details.
Displays the router's current routing table entries.
Summarizes router's IPv6 settings and client information.
Displays configured IPv6 routing details for the router.
Provides contact information for D-Link technical support.
Step-by-step guide to connect wireless devices using the WPS button.
Displays available wireless networks and connection options in Windows 8.
Explains connecting to WPA/WPA2 secured networks in Windows 7.
Guides configuring WPS feature using Windows 7.
Steps to connect to a wireless network using Windows Vista.
Connects to a wireless network using WPA/WPA2 security.
Instructions for setting up Wi-Fi protection using Windows Vista.
Connects to WPA/WPA2 networks using Windows XP.
Solves issues accessing the router's web interface.
Resets router to factory defaults if password is forgotten.
Adjusts MTU size to resolve connectivity issues with specific sites.
Explains wireless technology and its benefits.
Defines WLAN and its applications in various environments.
Verifies the router-assigned IP address for network adapters.
Manually assigns static IP addresses to network devices.
Lists the IEEE standards supported by the router.
Details the physical ports and buttons on the router.
Specifies the wireless standards and frequencies supported.
Provides US contact details for D-Link technical support.
Details how to obtain GPL/LGPL source code for the product.
Outlines the terms and duration of the limited hardware warranty.
Details the warranty terms for the router's software component.
Provides instructions for filing a warranty claim in the USA.
Information on how to register the product online for warranty and support.
To Next Page
