Technical Support Setup Procedure
How to Setup DIR-868L Router Access Control.
Step 1: Connect the LAN cable from the computer to any of 4 ports of the router.
Step 2: Open a web browser such as Internet Explorer, Mozilla Firefox or Google Chrome. On
the address bar of the web browser type in there the IP Address of the router and then press the
Enter key on your keyboard.
Step 3: Enter the Password (Wireless Password) which show on the sticker label at the base
of the router and click on Login to enter the web admin page again.
Step 4: Click on ADVANCED tab, then Click on ACCESS CONTROL on the left hand side,
then Click on Enable Access Control. Click Add Policy
To Next Page
