EasyManua.ls Logo

D-Link DIR-867 User Manual

D-Link DIR-867
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Version 1.00| 2017/08/23
User Manual
DIR-867
AC1750+ MU-MIMO Wi-Fi Gigabit Router

Other manuals for D-Link DIR-867

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-867 and is the answer not in the manual?

D-Link DIR-867 Specifications

General IconGeneral
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, WLAN
CertificationFCC, IC
Processor cores2
Built-in processorYes
Storage temperature (T-T)-20 - 65 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Output current1.5 A
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC, DC
AC input frequency50 - 60 Hz
Security algorithmsWPA, WPA2, WPS
Networking standardsIEEE 802.11u, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1750 Mbit/s
WLAN data transfer rate (first band)450 Mbit/s
WLAN data transfer rate (second band)1300 Mbit/s
Antennas quantity4
SIM card slotNo
WAN connection typeRJ-45
Number of products included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth183.7 mm
Width258.8 mm
Height49.2 mm
Weight576 g

Summary

Product Overview

Introduction

Provides an overview of the DIR-867 router's capabilities and benefits.

Features

Superior Wireless Networking

Explains the high-speed wireless capabilities and backward compatibility.

QoS Engine

Prioritizes network traffic for specific clients to ensure bandwidth allocation.

Extreme Wired LAN and WAN Networking

Highlights the high-speed Gigabit Ethernet ports for wired connections.

Firewall Settings

Configures the router's firewall to protect against malicious attacks.

Hardware Overview

Back Panel

Details the ports and buttons located on the back of the router.

Installation

Hardware Setup

Details the physical connection steps for the router, modem, and power.

Completing Setup

Outlines methods to finalize the router's internet and client connection setup.

Setup Wizard

Setup Wizard (continued)

Covers Wi-Fi settings and device admin password configuration within the setup wizard.

Setup Wizard (continued)

Presents a summary of settings and confirms successful configuration in the setup wizard.

Configuration

DIR-867

Provides details about the router's Wi-Fi network name, password, MAC, and IP addresses.

Connected Clients

Shows connected devices and allows editing their settings like IP reservation and parental control.

Settings

Wizard

Launches the initial setup wizard for router configuration.

Internet

Configures various internet connection types like DHCP, PPPoE, PPTP, L2TP, DS-Lite, and IPv6.

IPv6

Guides through configuring different IPv6 connection types and settings.

Dynamic IP (DHCP)

Static IP

PPPoE

PPPoE (continued)

PPTP

PPTP (continued)

L2TP

L2TP (continued)

DS-Lite

DS-Lite (continued)

IPv6

Auto Detection

Automatically detects the IPv6 connection method used by the ISP.

Static IPv6

Manual configuration for IPv6 with static IP information from the ISP.

Auto Configuration (SLAAC/DHCPv6)

Configures IPv6 address assignment automatically from the ISP.

IPv6 in IPv4 Tunnel

IPv6 in IPv4 Tunnel (continued)

6rd (continued)

Address Autoconfiguration Settings

Advanced settings for IPv6 address assignment and autoconfiguration type.

VLAN

Wireless

Smart Connect

Enables or disables the Smart Connect feature for simplified wireless setup.

Wi-Fi Name (SSID)

Allows creation of a name for the wireless network.

Password

Allows setting a password for wireless security.

Wireless - Smart Connect Disabled

2.4GHz / 5GHz

Configuration for enabling/disabling wireless networks and setting SSIDs/passwords.

Security Mode

Selection of security modes like None or WPA/WPA2-Personal.

Guest Zone

2.4 GHz / 5 GHz

Configuration for guest wireless networks, including SSID and password.

Network

Network Settings

Sets the router's LAN IP address, subnet mask, and management link.

Network (continued)

DHCP Server

Configures the DHCP server for automatic IP assignment to network clients.

Firewall Settings

Firewall Settings (continued)

IPv4/IPv6 Rules

Port Forwarding

Virtual Server

Dynamic DNS

Quick VPN

Quick VPN (continued)

Authentication Protocol

Selects the authentication protocol for Quick VPN.

Management

Time & Schedule

Configures the router's internal clock and schedules for various functions.

Time

Sets the time zone, time, and daylight saving options.

System Log

System Log (continued)

System Admin

Admin Password

Allows changing the administrator password for accessing the router.

Advanced Settings - Administration

Advanced settings for HTTPS server, remote management, and admin port.

System

Restore To Factory Default Settings

Resets the router to its original factory default settings.

Upgrade

Upgrade Manually

Instructions for manually upgrading firmware or language packs.

Quick VPN Server Setup Instructions

L2TP over IPsec

Enables or disables the Quick VPN server functionality.

iOS Devices

VPN Setup Instructions (Continued)

Install Profile

Instructions for installing the VPN profile on an iOS device.

Enter Shared Secret

Enters the Shared Secret (PSK) from the Quick VPN configuration page.

Shared Secret

Enters the Passkey in the Shared Secret text box for Mac OS X VPN.

Advanced settings

Enters the passkey in the Key text box under Use preshared key.

Select the Security tab

Selects the Security tab for VPN properties.

Click Advanced settings

Accesses advanced settings to enter the passkey.

Mac OS X

Windows 7

Windows 8.1/8

Add a VPN Connection

Windows 10

Android

VPN Setup Instructions

Guides on setting up Quick VPN on Android devices.

Edit VPN Profile

Connect a Wireless Client to your Router

WPS Button

Details the steps to use the WPS button for wireless connection.

Windows 8

Windows Vista®

WPA/WPA2

Troubleshooting

1. Why can’t I access the web-based configuration utility?

Addresses issues with accessing the router's web-based configuration interface.

3. Why can’t I connect to certain sites

Addresses issues with connecting to specific websites or sending/receiving emails.

2. What can I do if I forgot my password?

Explains how to reset the router if the administrator password is forgotten.

Appendix B - Networking Basics

Wireless Security

Details different levels of wireless security, including WPA2 and WPA.

Related product manuals