D-Link DIR-867 - IPv6 DNS Settings; LAN IPv6 Address Settings

41D-Link DIR-867 User Manual
Section 4 - Conguration
MTU Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:
IP Address Enter the IP address provided by your ISP
Service Name Enter the ISP service name (optional).
Reconnect Mode Select either Always-on or Manual.
MTU Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable prefix delegation services. This option is only
available if you selected Dynamic IP for address mode.
PPPoE (continued)