DIR-882 Quick Installation Guide
Configuring Network Printer
1. Make sure that a driver for your printer which will be used as a network
printer is installed on your PC.
5
2. To connect the printer to the router, power off both devices. Connect the
printer to the USB port of the router, power on the printer, then power on
the router.
3. Then access the web-based interface and go to the Print Server page.
4. Move the Enable print server switch to the right, from the Printer
drop-down list, select the printer connected to the USB port of the router,
and click the APPLY button.
5. Click the Start button and go to the Control Panel window.
5 Some home printers can work incorrectly as network printers. Contact the technical
support of your printer’s manufacturer to clarify if your printer supports this function.
47
To Next Page
Loading...
