D-Link Technical Support – How to setup DSL-2877AL for Internode VDSL connection Page 2 of 6
Step 1. Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP
address of your D-Link modem in the address bar: http://192.168.1.1.
When prompted type in the Username and Password, enter the validation code displayed on your page and
then click on the “Log In” button.
If you have not changed the password for the modem administration, the factory settings are:
Username: admin
Password: admin
If you cannot recall the password you have assigned to your modem, you will need to reset the modem to factory
defaults by pressing the reset button for 10 seconds. Please note that this will revert all the settings in the modem to
factory settings and you will have to reconfigure it with your Internet settings and Wireless security. Make sure you
have your Internet account details (given by your Internet Provider) handy.
To Next Page
Loading...
Need help?
General
