Need help?Do you have a question about the D-Link DSL-2760U and is the answer not in the manual?
General| Device Type | Wireless Router |
|---|---|
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | 300 Mbps |
| ADSL2+ Downstream Data Rate | 24 Mbps |
| ADSL2+ Upstream Data Rate | 1 Mbps |
| Antenna Type | External |
| Antennas | 2 |
| Wireless Standard | 802.11n |
| WAN Ports | 1 x RJ-11 |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| Security | WPA/WPA2 |
Describes the LED indicators on the front panel of the router.
Prerequisites and necessary information for router installation.
Important considerations for establishing an internet connection and filter usage.
Steps to power on the DSL-2760U router.
Procedure to reset the router to factory default settings.
Instructions for connecting the ADSL line to the router.
Guidance on connecting the router to Ethernet devices.
How to connect the router to hubs or switches.
Steps to connect a computer directly to the router.
Displays current configuration and running processes on the router.
Configure basic and advanced features of the router.
Configure specific wireless features of the router.
Run tests to diagnose router issues and outcomes.
Configure settings for router manageability.
Displays the router's LAN statistics.
Displays the router's WAN statistics.
Displays the router's xTM statistics.
Create filter rules to block outgoing IP traffic.
Create filter rules to allow incoming IP traffic.
Configure QoS queue management settings and default DSCP mark.
Add rules for QoS queue setup.
Select a preferred WAN interface as the system default gateway.
Add static routes to define specific network paths.
Add a Dynamic DNS address from services like DynDNS.org.
Configure DSL modulation type, phone line pairing, and capabilities.
Activate Samba function for USB storage sharing.
Configure basic wireless features like SSID and channel.
Configure wireless security features, authentication, and encryption.
Block or allow MAC addresses from connecting to the wireless network.
Add a new MAC address for the MAC filter configuration.
Configure wireless bridge options and disable access point functionality.
Displays currently connected authenticated wireless stations.
Backup the current router configuration.
Restore a previously saved router configuration.
Reset the router to its factory default settings.
View the system log and configure logging options.
Configure SNMP options for network management.
Configure TR-069 client for remote router configuration.
Configure automatic time synchronization and time zone offset.
Manage user accounts and change passwords for router access.
Enable or disable specific services on LAN or WAN.
Steps to configure the router using a web browser without the installation CD.
Procedure for resetting the router to its original factory default settings.
Steps to verify the router's IP address using the command prompt.
To Next Page
