D-Link DSL-2760U User Manual

D-Link DSL-2760U USER’S MANUAL
47
LAN
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to
manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your
LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will
change automatically if you change the IP address of the Router.
Display:
GroupName:
IP Address:
Subnet Mask:
Enable IGMP Snooping:
Standard Mode:
Blocking Mode:
Disable/ Enable DHCP
Server:
Start IP Address:
End IP Address:
Lease Time:
To access the Local Area Network (LAN) Setup
window, click the LAN button in the Advanced
Setup directory.
Select the appropriate group name. By default
there is only one group
Enter the LAN IP address for the router here.
Enter the Subnet Mask for the router here.
Tick this option to enable IGMP Snooping.
Select to use Standard Mode. (If IGMP Snooping
is enabled)
Select to use Blocking Mode. (If IGMP Snooping is
enabled)
Choose to enable or disable the DHCP Server
here.
Enter a starting IP Address for the DHCP pool
here.
Enter an end IP Address for the DHCP pool here.
Enter a DHCP Lease Time value here.
To add reserve an IP to a specific host click the
Add Entries button.

D-Link DSL-2760U Specifications

General

Brand	D-Link
Model	DSL-2760U
Category	Wireless Router
Language	English