D-Link DSL-2760U USER’S MANUAL
Wide Area Network (WAN) Service
The Wide Area Network (WAN) Service Setup page can be used to setup services regarding the WAN interface. The WAN interface on this router is the DSL port
side. When setting up the WAN configuration you can choose between various WAN interface connection methods. Before configuring WAN Service, the
information in Layter2 Interface section needs to be configured.
This window is used to configure the WAN interface. You can
add, delete and modify WAN interfaces on this window.
If you are setting up the WAN interface for the first time, click
the Add button.
Make sure Layer2 Interface is configured before clicking the
Add button.
WAN Service Interface Configuration – Select Interface:
Select a Layer 2 Interface for this service from the drop-down
menu, and click the Next button.
To Next Page
Loading...
