Wireless Bridge
This page allows you to configure wireless bridge features of the wireless LAN interface. You can select Wireless Bridge (also known as Wireless Distribution
System) to disable access point functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and
wireless stations will be able to associate to the AP.
There are three options to choose in the Bridge Restrict option: Enabled,
Enabled (Scan) and Disabled.
Choose Enabled to allow the user entering the remote bridge’s MAC
address manually.
Choose Enabled (Scan) to allow the user selecting remote bridges from a
list of bridges automatically picked up.
Choose Disabled to disable the wireless bridge option.
Click Apply/Save to save the wireless bridge options.
To Next Page
Loading...
Need help?
General
