D-Link DSL-2760U USER’S MANUAL
Quality of Service (QoS)
QoS or Quality of Service allows the router to help prioritize the data packet flow in your Router and network. This is very important for time sensitive applications
such as VoIP where it may help prevent dropped calls. Large amounts of non-critical data can be scaled so as not to affect these prioritized sensitive real-time
programs.
Queue Management Configuration
If Enable QoS checkbox is selected, choose a default DSCP mark to
automatically mark incoming traffic without reference to a particular
classifier. Click Apply/Save button to save it.
NOTE: If the Enable QoS checkbox is not selected, all QoS will be disabled
for all interfaces.
NOTE: The default DSCP mark is used to mark all egress packets that do
not match any classification rules.
If you disable WMM function in Wireless Page, queues related to wireless
will not take effects
Click the Add button to add a Queue Setup rule.
To Next Page
Loading...
Need help?
General
