D-Link DSL-2760U

D-Link DSL-2760U USER’S MANUAL
84
Wi-Fi Protected Access (WPA2)-Enterprise
WPA2 is the upgrade for WPA. WPA2 sorts out a couple of security
vulnerabilities the WPA might encounter. There are also two variations of
WPA2 known as WPA2-EAP (Enterprise) and WPA2- PSK (Personal).
When choosing to use WPA2-EAP the user has to specify a Radius Server
IP Address, Radius Server Port and a Radius Key.
Click Apply/Save to save and activate the change.
Wi-Fi Protected Access (WPA2)-Personal
When choosing to use WPA2-PSK the user only has to specify a Pre-Shared
Key. Note that there is NO Radius Server settings required when configuring
WPA2-PSK.
Enter the Group Key Interval and Encryption if needed.
Click Apply/Save to save and activate the change.